Iron Fabrication during the “Age” of Tin and Bronze in the Southern Waterberg of Limpopo Province, South Africa

Foreman Bandama, Shadreck Chirikure, Simon Hall, Innocent Shuro

Abstract


Abstract Ever since the 1908 re-discovery of the pre-colonial tin mines at Rooiberg in the Southern Waterberg of Limpopo Province of South Africa, archaeologists have focused much on tin and bronze production in and immediately around the mines. The interest in this metallurgy means that iron and copper have been overlooked despite the fact that the Southern Waterberg is also home to iron and copper ores that were exploited even before the second millennium CE inception of tin and bronze production in this area. This article explores iron production and consumption patterns at the second millennium CE sites of Rhenosterkloof 1 and Tembi 1 in the Sand River Valley of the Southern Waterberg. The present study specifically examines iron smithing technology through the analyses of blooms and metallic objects. To glean relevant information from the blooms and metallic objects, metallographic approaches of Optical Microscopy (OM) and Scanning Electron Microscopy (SEM) were used. The key findings of this study suggest that the objects are products of indigenous bloomery iron technology, which was widely used in southern Africa during the pre-colonial period. Careful hot and cold working was done to achieve optimal qualities of these pre-dominantly non-utilitarian iron objects. It is also clear that iron consumption patterns in the Southern Waterberg were embedded in the local and regional trade networks that serviced southern Africa in precolonial times. Key words: Iron smithing, blooms, Southern Waterberg, Rooiberg, metallography

Full Text:

PDF PDF

References


References

Bachmann, H. G. (1982). The identification of slags from archaeological sites.

London: Institute of Archaeology Occasional Papers 6.

Bandama, F. (2013). The archaeology and technology of metal production in

the Late Iron Age of the Southern Waterberg, Limpopo Province, South

Africa. Ph.D. Thesis, University of Cape Town, Cape Town.

Bandama, F. Hall, S., & Chirikure, S. (2013). Ores sources, smelters and

archaeometallurgy: Exploring Iron Age metal production in the

Southern Waterberg. Journal of African Archaeology, 11(2), 24-267.

Bandama, F. Hall, S. & Chirikure, S. (2015). Eiland crucibles and the earliest

relative dating for tin and bronze working in southern Africa. Journal of

Archaeological Science, 62, 82-91.

Bandama, F., Chirikure, S., Hall, S., & Tinguely, C. (2018). Measly but motley

and manifest: The typological and chemical characterisations of glass

beads from the Southern Waterberg, Limpopo Province of South Africa.

Journal of Archaeological Science, 18, 90-99.

Baumann, M. (1919). Ancient tin mines of the Transvaal. Journal of the Chemical,

Metallurgical and Mining Society of South Africa, 19, 120-132.

Brown, J. (1995). Traditional metalworking in Kenya (Cambridge Monographs in

African Archaeology 38). Oxford: Oxbow Books.

Brick, R. M., Gordon, R., & Phillips, A. (1965). Structure and properties of alloys.

New York: McGraw-Hill.

Childs, T. S. (1991). Technology and iron smelting furnaces in Bantu-Speaking

Africa. Journal of Anthropological Archaeology, 331-359.

Childs, S. T. (1991). Iron as utility or expression: Reforging function in Africa.

In R. M. Ehrenreich (ed.). Metals in society: Theory beyond analysis (pp.

Studies in the African

-670). Pennsylvania: MASCA, University Museum, University of

Pennsylvania.

Childs, S. T., & Dewey, W. J. (1996). Forging symbolic meaning in Zaire and

Zimbabwe. In P. R. Schmidt (ed.) The Culture and Technology of African

Iron Production (pp.145-171). Gainesville: University Press of Florida.

Childs, T., & Killick, D. (1993). Indigenous African metallurgy: Nature and

culture. Annual Review of Anthropology, 22, 27-72.

Chirikure, S. (2015). Metals in past societies: A global perspective on indigenous

African metallurgy. New York: Springer International Publishing.

Cleere, H. F. (1981). The iron industry of Roman Britain. PhD. Thesis, London

University, London.

Crew, P. (1996). Bloom refining and smithings slags and other residues. Historical

metallurgy archaeology data sheet 6. London: Historical Metallurgy

Society.

de Barros, P. (1988). Societal repercussions of the rise of traditional iron

production: A West African example. African Archaeological Review, 6,

-115.

Denbow, J., & Miller, D. M. (2007). Metal working at Bosutswe, Botswana.

Journal of African Archaeology, 5, 271-313.

Friede, H. M. (1979). Iron-smelting furnaces and the metallurgical traditions

of the South African Iron Age. Journal of the South African Institute of

Mining and Metallurgy, 79, 372-381.

Friede, H. M., & Steel, R. H. (1985). Iron Age iron smelting furnaces of the

western/central Transvaal - their structure, typology and affinities.

South African Archaeological Bulletin, 40(141), 45-49.

Friede, H. M., & Steel, R. H. (1986). Traditional smithing and forging of South

African bloomery iron. South African Archaeological Bulletin, 41, 81-86.

Studies in the African Past - Vol. 13/14 17

Frobenius, L. (1931). Erythrea. Berlin: Atlantis Verlag.

Gavriljuk, V. G. (2003). Decomposition of cementite in pearlitic steel due to

plastic deformation. Materials Science and Engineering, 345, 81-89.

Grant, M. R. (1994). Iron in ancient tin from Rooiberg, South Africa. Journal of

Archaeological Science, 21, 455-460.

Greaves, R. H., & Wrighton, H. (1957). Practical microscopical metallography.

London: Chapman and Hall.

Hall, S. (1981). Iron Age sequence and settlement in the Rooiberg, Thabazimbi

area. MSc Thesis, University of Witwatersrand, Johannesburg.

Herbert, E. W. (1996). Metals and power at Great Zimbabwe. In G. Pwiti & R.

C. Soper (eds.). Aspects of African archaeology: Papers from the 10th

Congress of the Pan African Association for Prehistory and related studies

(pp. 641-647). Harare: University of Zimbabwe.

Holl, A. F. C. (2000). Metals in precolonial African society. In M. S. Bisson, S. T.

Childs, P. de Barros & A. Holl. (eds). Ancient African metallurgy. Walnut

Creek: Altamira Press.

Holl, A. F. C. (2009). Early West African metallurgies: New data and old

orthodoxy. Journal of World Prehistory, 22, 415-438.

Killick, D. J. (1990). Technology in its social setting: Bloomery iron-workings at

Kasungu, Malawi, 1860–1940. PhD Thesis, Yale University, Yale.

Killick, D. J. (2009). Cairo to Cape: The spread of metallurgy through eastern

and southern Africa. Journal of World Prehistory, 22(4), 399-414.

Maggs, T. M. (1992). My father’s hammer never ceased its song day and night:

The Zulu ferrous metalworking industry. Natal Museum Journal of

Humanities, 4, 65-87.

Miller, D. (1992a). Iron Age metal working at Tsodilo Hills, northern Botswana.

PhD Thesis, University of Cape Town, Cape Town.

Studies in the African Past - Vol. 13/14

Miller, D. (1992b). Pioneering metallurgical analyses of indigenous metal artifacts

from southern Africa - Material collected by Frobenius expedition of

/1930. South African Archaeological Bulletin, 56, 108-115.

Miller, D. (1996). The Tsodilo jewellery: Metal work from northern Botswana.

Cape Town: University of Cape Town Press.

Miller, D. (2001). Metal assemblages from the Greefswald areas: K2, Mapungubwe

Hill and Mapungubwe Southern Terrace. South African Archaeological

Bulletin, 56, 83-103.

Miller, D. (2002). Smelter and smith: Iron Age metal fabrication technology in

southern Africa. Journal of Archaeological Science, 29, 1083-1131.

Miller, D., & Killick, D. (2004). Slag identification at southern African

archaeological sites. Journal of African Archaeology, 2(1), 23-47.

Miller, D., Killick, D., & van der Merwe, N. (2001). Metalworking in the northern

lowveld, South Africa, AD. 1000-890. Journal of Field, 28, 401-17.

Rostoker, W., Bronson, B., (1990). Pre-industrial iron: Its technology and

ethnology. (Archeomaterials Monograph 1). Philadelphia.

Samuels, L. E. (1980). Optical microscopy of carbon steels. Metals Park, Ohio:

American Society of Metals.

Sassoon, H. (1964). Iron smelting in the Hill Village of Sukur, North-Eastern

Nigeria. Man, 64, 174-184.

Schulz, E. H. (1950). Die Zusammensetzung und Aufbau einiger Metallfunde

der Afrika-Expedition von Leo Frobenius 1928/30. Paideuma, 5, 59-66.

Scott, D. A. (1991). Metallography and microstructure of ancient and historic

metals. California: The Getty Conservation Institute.

Stanley, G. H. (1931). Some products of native iron smelting. South African

Journal of Science, 28, 131-34.

Studies in the African Past - Vol. 13/14 19

Sutton, J. E. G. (1983). West African metals and the ancient Mediterranean.

Oxford Journal of Archaeology, 2 (2), 181-188.

Tessmann, G. (1913). Die Pangwe, Völkekundliche Monographieeines WestAfrikanischen Negerstämmes. Berlin: E. Wasmuth.

van der Merwe, N. J. (1980). Production of high carbon steel in the African

Iron Age: The direct steel process. In R. E. Leakey & B. A Ogot (eds.).

Proceedings of the 8thPan African Congress of Prehistory and Quarterly

Studies. Nairobi: International Leakey Memorial Institute for African

Prehistory.

van der Merwe, N. J., & Killick, D. J. (1979). Square: An iron smelting site near

Phalaborwa. South African Archaeological Society Goodwin Series, 3, 86-


Refbacks

  • There are currently no refbacks.